[Box Backup-dev] Box on Solaris 10 x86

[Stefan Norlin]

I obviously did not go through your posts careful enough.

It indeed seems to be related. Thanks a lot for pointing that out!

However, it happens some way through the tests again, and again.

Maybe the daemons are not always shut down correctly?

I will a look at it tomorrow... bedtime. :-)

Stefan


----- Original Message ----- 
From: "Per Thomsen" <pthomsen at reedtz.com>
To: <boxbackup-dev at fluffy.co.uk>
Sent: Thursday, February 02, 2006 12:44 AM
Subject: Re: [Box Backup-dev] Box on Solaris 10 x86


> On 2/1/06 3:32 PM, Stefan Norlin wrote:
>> Well, it compiles with one additional change:
>>
>> Include file asm/byteorder.h is present but the
>>
>> #define box_hton64(x) __cpu_to_be64(x)
>> #define box_ntoh64(x) __be64_to_cpu(x)
>>
>> does not work.
>>
>> __cpu_to_be64 and __be64_to_cpu cannot be found when linking.
>>
>> Also tests fails due to that the pid file does not get created it seems.
> Check if you have a bbstored process running. I had (as you may have
> seen) the exact same symptoms, and I had a bbstored process running that
> appeared to hang on to the socket, so the new process wouldn't start.
> 
> HTH,
> Per
> 
> -- 
> Per Reedtz Thomsen | Reedtz Consulting, LLC | F: 209 883 4119
> V: 209 883 4102    |   pthomsen at reedtz.com  | C: 209 996 9561
> GPG ID: 1209784F   |  Yahoo! Chat: pthomsen | AIM: pthomsen
> 
> _______________________________________________
> Boxbackup-dev mailing list
> Boxbackup-dev at fluffy.co.uk
> http://lists.warhead.org.uk/mailman/listinfo/boxbackup-dev
>